Community discussions

MUM Europe 2020
 
Superdust
Member Candidate
Member Candidate
Topic Author
Posts: 182
Joined: Mon Jun 11, 2007 3:24 pm

Different profile for LAN <-> LAN than LAN <-> WAN

Tue Oct 06, 2009 11:34 am

Hello

I have set up a hotspot, with usermanager.

The users of the hotspot should get 10Mbps on local addresses 192.168.1.0/24 and 10.1.0.0/24.
When accessing all other (WAN) the profile set in usermanager should apply.

How would I achieve this?
Need a good explanation as I`m a novice.

Regards.
 
User avatar
asus
Member
Member
Posts: 403
Joined: Fri Mar 27, 2009 9:42 am
Location: Mumbai, India

Re: Different profile for LAN <-> LAN than LAN <-> WAN

Tue Oct 06, 2009 4:16 pm

remove 192.168.1.0/24 and 10.1.0.0/24 & use only 10.0.0.0/8 so every user will be on same subnet & they will get around 100mbps speed from each other if ur lan is not seprated through vlan

or

you can configure this
http://wiki.mikrotik.com/wiki/How_to_ap ... as_traffic

for this you need high spec because you will be transferring all local traffic through server.
 
Superdust
Member Candidate
Member Candidate
Topic Author
Posts: 182
Joined: Mon Jun 11, 2007 3:24 pm

Re: Different profile for LAN <-> LAN than LAN <-> WAN

Fri Oct 09, 2009 3:54 pm

Thank you

How will this work?

LAN -> IP in Simple Queue -gets speed set in simple queue
IP in Simple Queue -> LAN -gets speed set in simple queue
LAN -> ALL other IP -gets speed set in profile User Manager
ALL other IP -> LAN -gets speed set in profile User Manager
 
Superdust
Member Candidate
Member Candidate
Topic Author
Posts: 182
Joined: Mon Jun 11, 2007 3:24 pm

Re: Different profile for LAN <-> LAN than LAN <-> WAN

Sun Oct 11, 2009 10:31 pm

Anybody?

Who is online

Users browsing this forum: No registered users and 6 guests