Litlle missunderstand with your answer. I think there is no different with http://forum.mikrotik.com/viewtopic.php ... 64#p286864.Hi
1) I have 3 hot spots running on my MT 750G box ( Level 4.13) , ok
2) I have another MT box 433AH configured with RADIUS ( User Manager 4.13 )
3) I have created 3 subscribers on the User Manager ex. sub1, sub2, sub3, with test users
ex. r_user1, r_user2, r_user3.
4) I have created one radius client on 750G box to talk to User manager. I tried to set the Domain field there to U Manager subscriber name that is: sub1 , ...2, .....3, non of them work just the 1st one. If is left blank. Should i set the field REALM to sub 1? and see?
My goal is to authenticated all 3 hotspots on that one box 750G MT. with User Manager ( RADIUS )
on the other box 433AH. So far i can athenticate only user r_user1 no matter what hotspot i am on.
Any clue? ideal.?
By the way I want to know your network diagram. Read your post make meI have tried everything to accomplish that. U say it is possible can you put more details what you mean is possible. I think the same is just no one in the whole world knows how to do it.
I upgraded to User Manager 5.8. Still the same problem when adding router with the same IP on second or 3rd User M. 5.8 subscripber, err: IP already in use.
After adding 3 virtual IPs on the client Box 750g ( the box with 3 hotspot ) 192.168.2.2, x.x.x.3, x.x.x.4 set up Radius client to talk just for testing to User Manager Box x.x.x.100 err: Radius get no reply, time out, can not connect. It defaults to 1st subscriber A ip: x.x.x.2 test radius user i set up is user1. I can log in with that no matter on witch hotspot i am connected.
How is your user manager configured? do i have to user Free Radius, or seperated MT harder for each hotspot?
hmhm,,, I think just two configHere is the diagram:
Sorry I'm forget somethingbtw:
The Radius Server can not update with NTP client system time
Here is the log :
/interface bridge add name=loopback0 disabled=no add name=loopback1 disabled=no /ip address add address=10.255.255.255/32 interface=loopback0 add address=10.255.255.254/30 interface=loopback1 /radius add service=hotspot secret=mySecret domain=hsprof1 src-address=10.255.255.255 add service=hotspot secret=mySecret domain=hsprof2 src-address=10.255.255.254
Check this: http://accessmanager.intombee79
please kindly explain without bridge interface such as for e.g
hotspot setup on interface ether1 192.168.2.2
hotspot setup on interface ether 2 192.168.3.3
then radius add 192.168.2.2 shared 1234
then radius add 192.168.3.3 shared 1233
???? please explain i really need to make the multi subscriber on one machine on one user-manager please.