Community discussions

MUM Europe 2020
just joined
Topic Author
Posts: 4
Joined: Fri May 15, 2009 1:25 pm

Wireless (Atheros AR5413) and RB433AH

Fri Jul 19, 2013 6:08 pm

Dear All,

i just changed and setup my Access Points with RB433AH and Wireless (Atheros AR5413) but i observed all my CPE RX are showing lower data rates and low throughputs,this is happening to 3 APs and 18 CPEs
compare to the formal Wireless (Atheros AR92xx) which TX and RX are very strong and better throughput

please i need assistance on this if there is settings to be done to get better througputs and date even links at signal levels TX -65/RX 62 still gets less than P Througputs 500Kbps and TX/RX CCQ 16/69 %

please assist!
Posts: 471
Joined: Sat May 06, 2006 4:11 pm

Re: Wireless (Atheros AR5413) and RB433AH

Fri Jul 19, 2013 8:59 pm

If all the rest is the same then find out specifications for these Atheros based boards. I suspect the 9K series is much more sensitive than the old ones. Maybe more powerful as well. In these cases you can not do more than change the AP antennas for higher gain ones, shorter RF-cables or go back to the 9K series.

Who is online

Users browsing this forum: No registered users and 6 guests