Community discussions

 
laith7s
just joined
Topic Author
Posts: 18
Joined: Wed Nov 26, 2014 6:03 pm

radius server is not responding

Wed Nov 26, 2014 6:16 pm

hey all
irst ofall , i have rb1100 with public IP x.x.x.x so i upgrade the rb and set user manager as i read it in wiki of mikrotik and i did these steps
1-set ip on ether2 =192.168.1.1/24
2-make a pool " 192.168.1.10-192.168.1.254"
3- activate DHCP server on ether2
4- add DNS
5-add router 0.0.0.0/24
6- add nat - masquerade
7- add user profile in hotspot
8-add server profile in hotspot and check on " use radius"
9-add server of hotspot
10-add radius server with IP public and do it with IP 127.0.0.1 and do it with 192.168.1.1 same problem and check on hotspot and add secret
11-enable radius incoming with port 1700
12-open user manager on browser with public ip and on router add public IP with same secret i added on radius
13- add profile
14- add users
so when i connect to the router always tell me radius server is not responding and i dont know why so any idea what the problem is?
 
laith7s
just joined
Topic Author
Posts: 18
Joined: Wed Nov 26, 2014 6:03 pm

Re: radius server is not responding

Mon Dec 01, 2014 7:05 am

any idea !!!?
 
laith7s
just joined
Topic Author
Posts: 18
Joined: Wed Nov 26, 2014 6:03 pm

Re: radius server is not responding

Mon Dec 01, 2014 7:05 am

any idea !!!?
 
laith7s
just joined
Topic Author
Posts: 18
Joined: Wed Nov 26, 2014 6:03 pm

Re: radius server is not responding

Sat Dec 13, 2014 10:43 pm

Up !!
 
laith7s
just joined
Topic Author
Posts: 18
Joined: Wed Nov 26, 2014 6:03 pm

Re: radius server is not responding

Sun Jan 25, 2015 11:44 pm

up !???
 
User avatar
bax
Member Candidate
Member Candidate
Posts: 269
Joined: Mon Dec 20, 2004 8:45 pm
Location: Croatia

Re: radius server is not responding

Mon Jan 26, 2015 12:06 pm

hm ... reset sistem and setup again like is explained in wiki ...
nobdy can answery you where you making mistake if can see your complete network layout and setup.

Who is online

Users browsing this forum: No registered users and 15 guests