No worries, nothing wrong with WISP or Home Dual as that is only the default setting of the router.
As long as we then modify the config from the ios app or winbox it should be fine.
what is that other attachment, a separate wifi device??
or you just wanted to show me the wifi settings?
I just wanted to show the new wifi settings after i disabled detect-interface-list setting
What is the purpose of this rule: /interface wireless access-list
add interface=wlan2 mac-address=80:58:F8:84:49:2F
I think you can get rid of it, if you didnt put that in there.
I did not add it explicitly. Those are the wireless clients connected to my network and it gets picked up automatically.
Also I dont see a name for your wlans??
Here is a typical wireless settting.
set [ find default-name=wlan1 ] band=2ghz-g/n basic-rates-b="" country=canada \
disabled=no distance=indoors installation=indoor mac-address=\
CC: mode=ap-bridge name=Devices rate-set=configured \
scan-list=2412,2437,2462 security-profile=devices_only ssid=RD9 \
supported-rates-b="" wireless-protocol=802.11 wmm-support=enabled \
See the diff...
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \
disabled=no distance=indoors frequency=auto installation=indoor mode=\
ap-bridge ????????????? security-profile=MyProfile ssid=chinna wireless-protocol=802.11
I did not see any option to name my wlans during the initial config. Can i add it now? If so, can you please tell from which screen in winbox i can add the name?
Regarding the 4 options you had recommended in your earlier post i am attaching screenshots related to those points. The ones that are highlighted in red in the screenshots, can i disable/remove them? Specifically the following:
Bridge interface in Interface list,
Completely disabling DHCP Server and DHCP client,
Disabling Firewall Router, DHCP Server, NAT, UPnP in HomeAP. Should i also try changing country to united states from united states3 or maybe change frequency for 2Ghz or 5Ghz?'
Also is it recommended to restart the router after any change is applied in webfix/winbox?
Please advise. Thank you.
You do not have the required permissions to view the files attached to this post.