Community discussions

MUM Europe 2020
 
Robus
just joined
Topic Author
Posts: 21
Joined: Fri Feb 12, 2016 2:24 pm

LED on/off RB951G-2HnD

Fri Feb 12, 2016 4:18 pm

Anyone has tried to on/off leds? Any idea how to do that?
 
kiaunel
Member Candidate
Member Candidate
Posts: 211
Joined: Mon Jul 21, 2014 7:59 pm
Location: Romania

Re: LED on/off RB951G-2HnD

Sun Feb 14, 2016 3:09 pm

sys leds add type=interface-activity interface=wlan1 leds=user-led
And the user led will blink when thereis wireless traffic on wlan1
You can set many options instead of interface-activity
[admin@Gateway] > sys leds add type=

Type ::= ap-cap | flash-access | interface-activity | interface-receive | interface-speed | ...


[admin@Gateway] > sys leds add type=
 
Robus
just joined
Topic Author
Posts: 21
Joined: Fri Feb 12, 2016 2:24 pm

Re: LED on/off RB951G-2HnD

Mon Feb 15, 2016 2:13 pm

sys leds add type=interface-activity interface=wlan1 leds=user-led
And the user led will blink when thereis wireless traffic on wlan1
You can set many options instead of interface-activity
[admin@Gateway] > sys leds add type=

Type ::= ap-cap | flash-access | interface-activity | interface-receive | interface-speed | ...


[admin@Gateway] > sys leds add type=
Could you please explain different way?
 
User avatar
Steveocee
Forum Guru
Forum Guru
Posts: 1110
Joined: Tue Jul 21, 2015 10:09 pm
Location: UK
Contact:

Re: LED on/off RB951G-2HnD

Mon Feb 15, 2016 3:21 pm

You haven't been amazingly clear in what you want to do with the LED's.
Yes you can turn them on or off if you want to.

If you are using winbox or webui try System>LED's to do this.

The above is a very correct CLI response to your query.
Steve "Steveocee" Carter
PC Gamer, Airsofter, MikroTik Nerd
My Website - My MikroTik Tutorials
 
Robus
just joined
Topic Author
Posts: 21
Joined: Fri Feb 12, 2016 2:24 pm

Re: LED on/off RB951G-2HnD

Mon Feb 15, 2016 10:52 pm

What I hve righ now is:

[XXXXXX@MikroTik Robus] > system leds print
Flags: X - disabled, * - default
# TYPE INTERFACE LEDS
0 * wireless-status wlan1 wlan

nothing more.
And, also, I would prefer to use winbox instead a command line.
In this case, I have to add triggers - first?
How can I choose each particular led for each interface?
 
kiaunel
Member Candidate
Member Candidate
Posts: 211
Joined: Mon Jul 21, 2014 7:59 pm
Location: Romania

Mon Feb 15, 2016 10:55 pm

In winbox go to system -> LEDs. You can setup them there

Sent from my Lenovo K50-t5 using Tapatalk
 
Robus
just joined
Topic Author
Posts: 21
Joined: Fri Feb 12, 2016 2:24 pm

Re:

Mon Feb 15, 2016 11:32 pm

In winbox go to system -> LEDs. You can setup them there

Sent from my Lenovo K50-t5 using Tapatalk

When I take new led trigger there is box: LEDs. And there is only: user-led and wlan-led. On my router i have 6 leds.
How can I add new triggers for each led? Or should I add one led trigger for each led? how can I do that?
Just give me some examples, please.
How can I understand this is that I va to have 6 led triggers configured. Or can I have one led trigger for all of them?

I dont catch the idea of new led trigger set up box...
 
InoX
Forum Guru
Forum Guru
Posts: 1964
Joined: Tue Jan 09, 2007 6:44 pm

Re: LED on/off RB951G-2HnD

Mon Feb 15, 2016 11:55 pm

Not a big deal...double clik doesn't hurt
You do not have the required permissions to view the files attached to this post.
 
Robus
just joined
Topic Author
Posts: 21
Joined: Fri Feb 12, 2016 2:24 pm

Re: LED on/off RB951G-2HnD

Tue Feb 16, 2016 8:29 am

Yes, I know, but there is no Led1, Led2.... in LEDs box...
 
kiaunel
Member Candidate
Member Candidate
Posts: 211
Joined: Mon Jul 21, 2014 7:59 pm
Location: Romania

Re: LED on/off RB951G-2HnD

Tue Feb 16, 2016 10:41 am

Yes, I know, but there is no Led1, Led2.... in LEDs
Not every routerboard have access to configure all leds. some have leds 1-5 + user led like mine 433 and others like 750 or hap lite has access only to user led
 
Robus
just joined
Topic Author
Posts: 21
Joined: Fri Feb 12, 2016 2:24 pm

Re: LED on/off RB951G-2HnD

Tue Feb 16, 2016 11:08 am

Not exactly. Have a look at the picture.
This what I would like to see in mine RB951
You do not have the required permissions to view the files attached to this post.
 
kiaunel
Member Candidate
Member Candidate
Posts: 211
Joined: Mon Jul 21, 2014 7:59 pm
Location: Romania

Re: LED on/off RB951G-2HnD

Tue Feb 16, 2016 11:34 am

One led can only take one activity.... if you want to assing other activity to led1 delete default one and create other
 
Robus
just joined
Topic Author
Posts: 21
Joined: Fri Feb 12, 2016 2:24 pm

Re: LED on/off RB951G-2HnD

Tue Feb 16, 2016 12:20 pm

Its fine, but what I already have is:
You do not have the required permissions to view the files attached to this post.
 
InoX
Forum Guru
Forum Guru
Posts: 1964
Joined: Tue Jan 09, 2007 6:44 pm

Re: LED on/off RB951G-2HnD

Tue Feb 16, 2016 8:35 pm

Hit + and add them. See if that works and also update to the latest ROS.
 
Robus
just joined
Topic Author
Posts: 21
Joined: Fri Feb 12, 2016 2:24 pm

Re: LED on/off RB951G-2HnD

Tue Feb 16, 2016 10:05 pm

Hit + and add them. See if that works and also update to the latest ROS.
1 - I tried. Mentioned above.
2 - I suppose i have the last stable one.
 
User avatar
Steveocee
Forum Guru
Forum Guru
Posts: 1110
Joined: Tue Jul 21, 2015 10:09 pm
Location: UK
Contact:

Re: LED on/off RB951G-2HnD

Tue Feb 16, 2016 11:37 pm

I think on that you can only configure the user-led as an extra. On the ones I have set up I set it to interface status on the ppp client to give an "internet light" for the lehmans.
Steve "Steveocee" Carter
PC Gamer, Airsofter, MikroTik Nerd
My Website - My MikroTik Tutorials
 
Robus
just joined
Topic Author
Posts: 21
Joined: Fri Feb 12, 2016 2:24 pm

Re: LED on/off RB951G-2HnD

Wed Feb 17, 2016 8:23 am

I think on that you can only configure the user-led as an extra. On the ones I have set up I set it to interface status on the ppp client to give an "internet light" for the lehmans.
Could you print screen?
 
Robus
just joined
Topic Author
Posts: 21
Joined: Fri Feb 12, 2016 2:24 pm

Re: LED on/off RB951G-2HnD

Thu Feb 18, 2016 9:19 pm

Not a big deal...double clik doesn't hurt
What is the model of your device? RB951G-2HnD?
 
User avatar
Steveocee
Forum Guru
Forum Guru
Posts: 1110
Joined: Tue Jul 21, 2015 10:09 pm
Location: UK
Contact:

Re: LED on/off RB951G-2HnD

Wed Mar 02, 2016 10:12 pm

I think on that you can only configure the user-led as an extra. On the ones I have set up I set it to interface status on the ppp client to give an "internet light" for the lehmans.
Could you print screen?
Not currently from a 951 as they are all in deployment with customers, I can give you an example of mine from my RB3011 though as the setup is the same.

Image

And for MikroTik forum correctness;
add interface=pppoe-out1 leds=user-led type=interface-status
***Note name of your ppp interface may be different
Steve "Steveocee" Carter
PC Gamer, Airsofter, MikroTik Nerd
My Website - My MikroTik Tutorials
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 1746
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: LED on/off RB951G-2HnD

Wed Mar 02, 2016 10:49 pm

until today the only configurable LED on rb951G is wireless LED
 
User avatar
Steveocee
Forum Guru
Forum Guru
Posts: 1110
Joined: Tue Jul 21, 2015 10:09 pm
Location: UK
Contact:

Re: LED on/off RB951G-2HnD

Thu Mar 03, 2016 9:51 pm

until today the only configurable LED on rb951G is wireless LED
You are correct, my apologies, I am talking about 952.
Steve "Steveocee" Carter
PC Gamer, Airsofter, MikroTik Nerd
My Website - My MikroTik Tutorials

Who is online

Users browsing this forum: MSN [Bot] and 41 guests