Community discussions

MikroTik App
just joined
Topic Author
Posts: 7
Joined: Wed Feb 03, 2016 9:03 am

OpenVPN routing

Thu Mar 31, 2016 5:43 pm


I have some issues setting up my OpenVPN network. I can make succesfull OpenVPN connection from my MikroTik client router to my MikroTik server router. Moreover I can ping OpenVPN server ( from my MikroTik client ( but I can't ping server from inside of LAN ( ).

This is what I'm trying to achieve:

And this is my current setup:

/ip firewall nat
 chain=srcnat action=masquerade out-interface=wlan1-local log=no log-prefix="" 
 chain=srcnat action=masquerade src-address= out-interface=OpenVPN log=no log-prefix="" 
/ip firewall mangle
chain=prerouting action=mark-routing new-routing-mark=OpenVPN passthrough=yes src-address= log=no log-prefix="" 
Routing table
 0 A S                                1
 1 ADS                              1
 2 ADC        ether1-gateway            0
 3 ADC      OpenVPN                   0
 4 ADC  wlan1-local               0
I would be very grateful for any feedback.
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Sat Feb 20, 2016 7:04 pm

Re: OpenVPN routing

Sun Apr 03, 2016 6:57 pm

Add this to 10 10.10.1 Mikrotik Router:
/ip route add dst-address= gateway=10.10.10 5
Remove NAT on OpenVPN interface.

And add Mikrotik Router:
/ip route add dst-address= gateway=
Network Specialist

Need know where is cellular tower? Try CellMapper to get know where is cellular tower:

Who is online

Users browsing this forum: No registered users and 25 guests