New to VLANs...
Here is my setup:
X0 = (VPN Network) 10.11.10.0/24
WLAN = Bridged to X0
X2 = Local Network 192.168.11.0/24
X3,X4= Portgroup with X2
X0 & X2 ----> MikroTik CRS125-24G
Port 1 Gateway
Port 2 Master (192.168.11.0/24) = X2
Port 3-19 Slave to Master Port 2
Port 20 Master (10.11.10.0/24) = X0
Port 21-24 Slave to Master Port 20
New Addition ( Upstairs Office Area) has a CAT 5E connection between above MikroTik and a new MikroTik (same model as downstairs unit) in the upstairs office. Only have a single CAT 5E from the downstairs office to upstairs due to old home converted to office. Not a good way to run cabling.
So long story short, I am wanting to carry both the X0 and X2 networks to the upstairs office so that I can use both, However, they need to stay separate due to HIPAA Compliance.
Can someone help me out?