Community discussions

MikroTik App
 
haccks
newbie
Topic Author
Posts: 34
Joined: Tue Mar 29, 2016 2:10 pm

How to increase the address pool for a hotspot created on VLAN?

Thu Apr 14, 2016 5:18 pm

Currently I created a hotspot on VLAN10. The address pool for this is 192.168.10.2-192.168.10.254. How can I increase/add more address pool to this hotspot? For example if all IP addresses in the above range is occupied then new IP can be assigned from the pool 192.168.2.2-192.168.3.254 or 192.168.4.2-192.168.4.254 or 192.168.100.2-192.168.100.254 so that there can be more than 252 users on the network at a time.

Any help will be appreciated.
 
mjsabri
Trainer
Trainer
Posts: 109
Joined: Sat Dec 12, 2015 10:55 am

Re: How to increase the address pool for a hotspot created on VLAN?

Sun Jul 31, 2016 11:20 pm

Hello
you can use more ip address in ip pool but you should use bigger subnet
Mikrotik Certified Consultant
[ MTCNA , MTCRE , MTCWE , MTCTCE , MTCUME , MTCINE ]
 
haccks
newbie
Topic Author
Posts: 34
Joined: Tue Mar 29, 2016 2:10 pm

Re: How to increase the address pool for a hotspot created on VLAN?

Mon Sep 19, 2016 4:53 pm

Hello
you can use more ip address in ip pool but you should use bigger subnet

Are you sure increasing subnet will work?

Who is online

Users browsing this forum: erlinden and 122 guests