There is one cat-5 coming from the ONT to the Century Link router. The cable boxes are connected to the router via cat-5.
I did manage to put the cable boxes into a switch... found there to be no VLAN tags, despite what I was told.
After reading a few articles... it seems that the feed from the ONT will provide a Public DHCP address to a client tagging 201.
Added a VLAN of 201 to an interface... sure enough... I get the Public IP. Internet works... but TV stops after about 7 seconds.
Now where I am stuck is the TV part.
Code: Select all
/interface ethernet set [ find default-name=ether5 ] comment=\ "VLAN Tag of 201 applied to this interface" name=ether5-test-WAN /interface vlan add interface=ether5-test-WAN name=4IOT vlan-id=201 /ip dhcp-client add comment="Tagged WAN" dhcp-options=clientid,clientid,hostname disabled=no \ interface=4IOT use-peer-dns=no use-peer-ntp=no /ip firewall nat add action=masquerade chain=srcnat comment="Masq RLC Net Only" out-interface=\ 4IOT src-address-list=RLCNet to-addresses=0.0.0.0
I found this article..
http://www.dslreports.com/forum/r302708 ... in-Seattle
I just can't seam to figure it out.
I am not real familiar with IGMP settings.
Anyone have any insight?