I have 2 RBwAPG-5HacT2HnDs to setup a home wifi, and I'm trying to test these APs with RouterOS in Exsi before wiring them to real RB2011.
but these 2 APs can't be connected to the RouterOS router at the same time, if only one AP is connected, every thing is good. But once the 2nd AP is connected, usually the 1st one will be "kicked out", be inaccessible, the 2nd AP is unstable as well.
This issue has nothing to do with CAPSMAN or wireless, the problem is I can't let 2 non-router RouterOS live in the same subnet.
the topology is vmnic 4/5 connected to 2 WAPs, MATLAB is where I manipulate winbox, MATLAB is working great, accessible to internet.
the RouterOS router setup is very simple, it plays as a secondary router after a real RB2011 which is functioning, and these 2 WAPs are hooked directly to this ESXI router
Code: Select all
/interface bridge
add name=bridge1
/ip neighbor discovery
set ether1 discover=no
set ether2 discover=no
set ether3 discover=no
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=192.168.2.10-192.168.2.100
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
/ip address
add address=192.168.2.1/24 interface=ether2 network=192.168.2.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.2.0/24 gateway=192.168.2.1 netmask=24
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1
/system identity
set name=CAPSMAN
Code: Select all
/interface bridge
add admin-mac=E4:8D:8C:72:AD:83 auto-mac=no disabled=yes name=bridgeLocal
/interface wireless
set [ find default-name=wlan1 ] ssid=MikroTik
set [ find default-name=wlan2 ] mode=station-pseudobridge ssid=MikroTik
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/interface bridge port
add bridge=bridgeLocal disabled=yes interface=ether1
add bridge=bridgeLocal interface=wlan1
add bridge=bridgeLocal interface=wlan2
/interface wireless cap
set bridge=bridgeLocal discovery-interfaces=ether1 interfaces=wlan1,wlan2
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1
/system clock
set time-zone-name=Asia/Shanghai
/system identity
set name=AP83