Community discussions

 
nsb
just joined
Topic Author
Posts: 18
Joined: Sun Mar 12, 2017 5:43 pm

Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?

Sun Mar 12, 2017 6:33 pm

I have 2 WANs
Ether9-Wan1 with 5mb
Ether10-Wan2 with 10mb

So my total speed will be 15mb.
 
AldoJimenez
Trainer
Trainer
Posts: 30
Joined: Fri Feb 12, 2016 11:49 pm
Contact:

Re: Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?

Mon Mar 13, 2017 3:30 pm

I have 2 WANs
Ether9-Wan1 with 5mb
Ether10-Wan2 with 10mb

So my total speed will be 15mb.
Use PCC. Here are a few resources:

https://wiki.mikrotik.com/wiki/How_PCC_works_(beginner)

https://wiki.mikrotik.com/wiki/Manual:PCC
Expert consulting in | BGP | MPLS | OSPF | Se Habla Español 1-855-645-7684
http://www.iparchitechs.com #1 ranked MikroTik consulting firm in North America

Image
 
nsb
just joined
Topic Author
Posts: 18
Joined: Sun Mar 12, 2017 5:43 pm

Re: Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?

Mon Mar 13, 2017 3:58 pm

Hi AldoJimenez,

It is a good explanation, But I still don't understand, If I have many VLAN one Ether1, 2, 3, 4 as Bridge-Trunk. As in the example just said only one LAN.

1- How to modify LAN to Many VLAN?
2- Will the PCC work good in of My two WANs?

THANKS
 
erlinden
Member Candidate
Member Candidate
Posts: 173
Joined: Wed Jun 12, 2013 1:59 pm

Re: Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?

Mon Mar 13, 2017 4:12 pm

Please have a look at all the other topics that can be found on the wiki:
https://wiki.mikrotik.com/wiki/Manual:Interface/VLAN
 
AldoJimenez
Trainer
Trainer
Posts: 30
Joined: Fri Feb 12, 2016 11:49 pm
Contact:

Re: Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?

Tue Mar 14, 2017 6:10 am

Hi AldoJimenez,

It is a good explanation, But I still don't understand, If I have many VLAN one Ether1, 2, 3, 4 as Bridge-Trunk. As in the example just said only one LAN.

1- How to modify LAN to Many VLAN?
2- Will the PCC work good in of My two WANs?

THANKS
Yes this will work with a multi VLAN setup as long as routing is setup correctly. Search for Multiple WAN Load Balancing with PCC and you will find several walkthrough's for 2, 3 and 4 WANs.
Expert consulting in | BGP | MPLS | OSPF | Se Habla Español 1-855-645-7684
http://www.iparchitechs.com #1 ranked MikroTik consulting firm in North America

Image

Who is online

Users browsing this forum: MSN [Bot] and 31 guests