Community discussions

MikroTik App
 
IYARINDRA
just joined
Topic Author
Posts: 10
Joined: Fri Apr 07, 2017 6:13 pm

How to set Router?

Fri Apr 07, 2017 6:20 pm

hi, i have a question here.

I have 1 wan connection (eth1) --> x.x.x.25/29
I have 4 usable public ip to designate to specific port...

eth2-eth5 --> local dhcp 192.168.1.x
eth6-9 (public ip x.x.x.27 - x.x.x.30)

How do I set them up?

Regards.
 
idlemind
Forum Guru
Forum Guru
Posts: 1147
Joined: Fri Mar 24, 2017 11:15 pm
Location: USA

Re: How to set Router?

Sun Apr 09, 2017 12:27 am

hi, i have a question here.

I have 1 wan connection (eth1) --> x.x.x.25/29
I have 4 usable public ip to designate to specific port...

eth2-eth5 --> local dhcp 192.168.1.x
eth6-9 (public ip x.x.x.27 - x.x.x.30)

How do I set them up?

Regards.
Do you truly want the devices plugged into eth 6 - 9 to actually have the public IPs assigned to them? You can use NAT to keep the systems on private IPs like your other systems and forward only the necessary ports to those devices that require public access.
 
IYARINDRA
just joined
Topic Author
Posts: 10
Joined: Fri Apr 07, 2017 6:13 pm

Re: How to set Router?

Sun Apr 09, 2017 8:59 am

hi, i have a question here.

I have 1 wan connection (eth1) --> x.x.x.25/29
I have 4 usable public ip to designate to specific port...

eth2-eth5 --> local dhcp 192.168.1.x
eth6-9 (public ip x.x.x.27 - x.x.x.30)

How do I set them up?

Regards.
Do you truly want the devices plugged into eth 6 - 9 to actually have the public IPs assigned to them? You can use NAT to keep the systems on private IPs like your other systems and forward only the necessary ports to those devices that require public access.

Thank you for your suggestion. I got everything done as well as your suggestion. Thank you again ^_^

Who is online

Users browsing this forum: Google [Bot] and 41 guests