My RB962's ip is 192.168.1.1
I have a rancher/k8s cluster on virtualbox vm that has bridged network (ip: 192.168.1.101-192.168.1.103) .
There is a vxlan SDN (10.42.0.0/16) created for rancher/k8s cluster.
I can get direct access to all host (docker container) on vxlan by set any host in 192.168.1.101-192.168.1.103 as gateway.
e.g. on macos `sudo route -n add -net 10.42.0.0/16 192.168.1.101` or on windows `route ADD 10.42.0.0 MASK 255.255.0.0 192.168.1.101`
In company, I asked admin to add static route on cisco device so we can access vxlan on any host in office, I don't know what he did.
I want to have same effect at home on my private small cluster, so I bought a RB962 and hope it works.
But after I add route by `ip route` and `add dst-address=10.42.0.0/16 gateway=192.168.1.101`
I got a entry like this:
Code: Select all
| | | Dst. Address | Gateway | Distance | Routing Mark | Pref. Source |
| - D | AS | 10.42.0.0/16 | 192.168.1.101 reachable bridge2 | 1 | | |
Code: Select all
PING 10.42.60.194 (10.42.60.194): 56 data bytes
Request timeout for icmp_seq 0
92 bytes from 192.168.1.1: Redirect Host(New addr: 192.168.1.101)
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst
4 5 00 0054 9b0d 0 0000 3f 01 1140 192.168.1.19 10.42.60.194