Community discussions

MikroTik App
 
jphconstantin
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 90
Joined: Fri Sep 22, 2017 7:17 pm
Location: Switzerland

Forward from a list to another list

Fri Oct 06, 2017 4:32 pm

Hello,

I have a SIP provider who has 8 servers. Then I created an addres-list called SIP_Provider
I have three phones (one ip phone and two softphones) on my lan 192.168.1.0. Then I created an address-list called Phones

I want to forward the voip traffic (sip+rtp) from SIP_Provider to Phones

In the Ip-Fiewall-nat window, I created a new rule:
chain:dstnat
proto:6
dst-port:5060
in.interface:ether1
Advanced tab:
dst. address list: SIP_Provider
Action tab:
dst-nat
to addresses: *** cannot enter an address list !!! ***

First of all, is it correct to want to do that ?
Why we cannot an address list as "to addresses" ?
Thank you ba advance
 
Shadeofspirit
Member Candidate
Member Candidate
Posts: 203
Joined: Fri May 27, 2016 12:15 am
Location: Minsk
Contact:

Re: Forward from a list to another list

Fri Oct 06, 2017 4:38 pm

Hello,

I have a SIP provider who has 8 servers. Then I created an addres-list called SIP_Provider
I have three phones (one ip phone and two softphones) on my lan 192.168.1.0. Then I created an address-list called Phones

I want to forward the voip traffic (sip+rtp) from SIP_Provider to Phones

In the Ip-Fiewall-nat window, I created a new rule:
chain:dstnat
proto:6
dst-port:5060
in.interface:ether1
Advanced tab:
dst. address list: SIP_Provider
Action tab:
dst-nat
to addresses: *** cannot enter an address list !!! ***

First of all, is it correct to want to do that ?
Why we cannot an address list as "to addresses" ?
Thank you ba advance
in tabe "Advanced" you can add src and dst address lists
 
jphconstantin
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 90
Joined: Fri Sep 22, 2017 7:17 pm
Location: Switzerland

Re: Forward from a list to another list

Sat Oct 07, 2017 1:30 am

If I do that I have an error because the field "to addresses" must not be empty.
And if I enter the name of an address list in the field "to addresses" then it's refused.

Who is online

Users browsing this forum: Adephx, cmmike, WiesiDeluxe and 43 guests