Community discussions

 
fabmpo
just joined
Topic Author
Posts: 2
Joined: Fri Oct 06, 2017 6:30 pm

MikroTik RB951 reset issue

Fri Oct 06, 2017 6:45 pm

Hello!
I have a MikroTik router RB951 and amateur network. With WinBox, I reinitialized the configuration without checking the default configuration. there I am utterly lost; there is no signal WIFI and even cable, I can not access to http://192.168.88.1/. I am completely lost. Need help
 
andriys
Forum Guru
Forum Guru
Posts: 1187
Joined: Thu Nov 24, 2011 1:59 pm
Location: Kharkiv, Ukraine

Re: MikroTik RB951 reset issue

Fri Oct 06, 2017 7:06 pm

 
fabmpo
just joined
Topic Author
Posts: 2
Joined: Fri Oct 06, 2017 6:30 pm

Re: MikroTik RB951 reset issue

Tue Oct 10, 2017 4:33 pm

Thanks!
The router only lights up with the adapter plugged in. I pressed the reset button for three seconds but still failed
 
Adrian650
just joined
Posts: 1
Joined: Wed Oct 18, 2017 1:56 pm

Re: MikroTik RB951 reset issue and 2011

Wed Oct 18, 2017 2:09 pm

Hi,

I've a similar problem with a 2011. It's been great for a few years but after an update I screwed the config. Did a reset as I've done before and got the display for default admin password suggesting a clean start.

BUT I can't access via 192.168.88.1 and no default WiFi service.

Tried reset a number of times and via 'front panel' reset configuration but always same result.

Any ideas?
 
User avatar
matiaszon
Member
Member
Posts: 305
Joined: Mon Jul 09, 2012 9:26 am

Re: MikroTik RB951 reset issue

Wed Oct 18, 2017 2:23 pm

1. Connect MikroTik via cable to your computer.
2. Run WinBox on your computer.
3. Click on "Neighbors" card.
4. Click "Refresh".
5. Connect with the desired device by MAC address.

Who is online

Users browsing this forum: No registered users and 45 guests