I've configured my Mikrotik router as an OpenVPN client by following this guide: https://github.com/missinglink/mikrotik-openvpn-client
And it connects to the OpenVPN server in the cloud and routes outbound traffic through it as intended. I've also been successful using port forwarding on the server to reach specific devices and services physically connected to the Mikrotik LAN. For example, I have an IP camera connected to the Mikrotik with static IP of 192.168.20.80 and am able to reach it's HTTP configuration webpage using a firewall rule (DST-NAT) on the OpenVPN interface. The issue I'm having is that I'm unable to expose the Mikrotik webfig using similar rules. If I'm wired directly into the Mikrotik, then I can reach the webfig via 192.168.20.1:80, however, for some reason similar firewall rules used for the IP camera don't work when trying to access the webfig site. My best guess is that it has something to do with the webfig IP being the same as the gateway IP? So any ideas on how can I access the webfig remotely through the OpenVPN network? Any help on this would be greatly appreciated!