I've never used the Vlan on the routeros, i need help to configure my lan like this scheme
I've 3 WAN point, i would to separate it with vlan
How i can setup the routerboard?
Thanks a lot
Thanks for the clarification!You probably have your terminology wrong. "Untagged" just means the device is plugged into a regular access port (in Cisco language), but configured to be on a certain vlan. Probably all of your devices will be plugged into untagged access ports. If you need more clarification on a tagged vs untagged port, ask.
You have vlans 20 and 30, so let's call your "untagged" examples vlan 10 for the purposes of this config.
What you are doing is pretty much exactly the same as this example:
https://wiki.mikrotik.com/wiki/Manual:I ... s_ports.29
ether2 in the example is how you would set up your link from the RB2011 to the antenna box, as well as the wireless links between the antenna boxes.
Then you would configure your untagged ports to be connected to whatever vlan they should be connected to like ether6, 7 and 8 in the example.
Does that make sense?
/interface vlan add interface=ether2 name=eth2-vlan200 vlan-id=200 add interface=ether2 name=eth2-vlan300 vlan-id=300 add interface=ether2 name=eth2-vlan400 vlan-id=400