Hi All.

I need some help from your side.

i just received my sxt lte kit route. I just connected it and i settled the apn but there is something strange to me..

the led bars on the body are all off een i'm connected to internet..the inner lte led is off but i've 4g coverage..i could check my mobile who's sharing the same contract .
Some one can help me?

Thanks .

maurizio

did you get the IP address from the LTE interface and in the router the LTE interface has R (Running flag) and the LTE status shows the signal for your LTE connection?

HI.

Yes i got the LTE Ip..but all leds are off..

Do i need to set something more?

Do i need to select the band as well on the quick set web interface?

Thanks

This router does not have a wifi module right?

Thanks

Router doesn't have a wifi module - just LTE.
When the connection in the Quickset LTE menu is established does it shows the signal in there? If yes, then it should also show that signal using the LEDs.

Hello.

On the quick setup the lte signal is shown.

i realized that i had to activate the all 5 leds in order to get them works..from system you can disable or enable the LEDs.

Anyway the LTe LED on the PCB Board is always off even i'm connected to the LTE.

I've another question.

I can't log in with the pwd because i wrong typed it..

How can remove the pwd. do i need to reset the unit?

Is it enough to reset the sxT while is powerd on.?

Thanks in advance.

maurizio

you need to reset the board configuration then. Please follow this manuals section "Resetting the RouterOS configuration":
https://wiki.mikrotik.com/wiki/Manual:Reset_button

HI.

The reset is done and i could enter a new pwd.

There is any utility to be used in order to find the best signal for the antenna?

The RSRP graphs shows me a intensity of -88 dB...why all the 5 leds are on?

The Led 5 is settled to -51 DB..why is on even the signal is lower then the threshold?

Thanks in advance.