Hello,

today I started with CAPsMan on my hEX and got a WAP working.
I had much trouble get the configuration working. I set 2,4 GHz and 5 GHz with its frequency, band, control channel width and extension channel. I recognized that I got errors like "unsupported channel" for 2,4 GHz and the 5 GHz not visible when I set extension table on eCee, eeCe, eC or Ce. I tried to set "control channel width" to 20 MHz and 40 MHz turbo. It didn't work.
Now i disabled extension channel and set width to 20 MHz. The frequency I use is 5280 (5ghz-onlyac) and 2422 (2ghz-onlyn).
Do you have and suggestions how to configure the CAPsMan configuration profiles to get it working with extension channel?

Thanks,
Jens

I misunderstood something, this question is obsolet.
I misunderstood width of the "control channel" and controlling the "channel width"

Forget about!