CCR is main device with PPPoE. RB962 is second device connected from CCR Eth6 to RB962 Eth1 (want wifi).
Devices connected to CCR work fine, internet is ok but devices connected to RB962 have a problem, no internet connection.
On RB962 I created bridge to all ports except ether1.
Created Address list
dhcp clientFlags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK INTERFACE
0 10.31.10.0/24 10.31.10.0 bridge1
1 D 10.31.0.100/24 10.31.0.0 ether1
dhcp serverFlags: X - disabled, I - invalid, D - dynamic
# INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS
0 ether1 yes yes bound 10.31.0.100/24
poolFlags: D - dynamic, X - disabled, I - invalid
# NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP
0 dhcp1 bridge1 dhcp_pool 1d
and NAT masquerade to ether1.# NAME RANGES
0 dhcp_pool 10.31.10.1-10.31.10.20
Internet still doesn't work. Ping from Mikrotik to 184.108.40.206 works fine but devices connected wirelessly don't work.
What am I doing wrong please?