From the diagram I am having trouble monitoring radios on the LAN side of 192.168.30.1 ( ie 10.10.25.12). Air control can monitor everything up to this point.
Ether 5 is set to WAN, Ether 1 is set to LAN, I am trying to get both talking and open ports needed for monitoring in air control (eg 10001). I cannot ping from 10.10.25.12 to 10.10.25.3, times out. I can see the 3 radios if i go into /IP/Neighbors on 192.168.30.1 .Hope someone out there can help or give me some direction. Thanks