I want to connect 2 mikrotik routes and ping all hosts from different routers.
MikroTik-1 access internet but the MikroTik-2 does not access the internet.

[admin@MikroTik-1] > ip address print
# ADDRESS NETWORK INTERFACE
0 192.168.2.1/24 192.168.2.0 ether2-Router2
1 10.10.1.1/24 10.10.1.0 ether4-Lan
2 192.168.1.10/24 192.168.1.0 ether1-wan

admin@MikroTik-1] > ip route print
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 0.0.0.0/0 192.168.1.1 1
1 ADC 10.10.1.0/24 10.10.1.1 ether4-Lan 0
2 A S 10.10.2.0/24 192.168.2.2 1
3 ADC 192.168.1.0/24 192.168.1.10 ether1-wan 0
4 ADC 192.168.2.0/24 192.168.2.1 ether2-Router2 0

[admin@MikroTik-1] > ip firewall nat print
0 chain=srcnat action=masquerade log=no log-prefix=""
___________________________
Router2
[admin@MikroTik-2] > ip address print
# ADDRESS NETWORK INTERFACE
0 192.168.2.2/24 192.168.2.0 ether1-Router1
1 10.10.2.1/24 10.10.2.0 ether2-lan

[admin@MikroTik-2] > ip route print
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 10.10.1.0/24 192.168.2.1 1
1 ADC 10.10.2.0/24 10.10.2.1 ether2-lan 0
2 ADC 192.168.2.0/24 192.168.2.2 ether1-Router1 0

[admin@MikroTik-2] > ip firewall nat print
0 chain=srcnat action=masquerade log=no log-prefix=""

For start, you have no default route on Router2.

You need to add routes for all corresponding address ranges.


On Mikrotik 1 define a route to get to the 10.10.2.0/24 subnet. The gateway would be 192.168.2.2 on Mikrotik 2

On Mikrotik 1 define a route to get to the 10.10.1.0/24 subnet. The gateway would be 192.168.2.1 on Mikrotik 1
On Mikrotik 1 define a route to get to the 192.168.1.0/24 subnet . The gateway would be 192.168.2.1 on Mikrotik 1

Also add default route for 0.0.0.0/0 on Mikrotik 2, as Sob wrote, so that traffic on mikrotik 2 can get out to the internet. the gateway would depend on where the WAN is connected