BaseBox 5 and R11e-LTE not working

timnis · Mon Oct 08, 2018 2:04 pm

Hi,

I have BaseBox 5 (RB912UAG-5HPnD-OUT) and I try to get R11e-LTE working. I have tested with Qeuctel EP06-E and its working, but when I change R11e-LTE card it doesn't.

I have latest stable version in use 6.43.2. In lte1 functionality field it says "tx and rc tf disabled"?? How can I enable it?

Log:

00:15:01 lte,error reply timeout for: AT+CPMS="SM","SM","SM" 
00:15:01 lte,async lte1: sent AT E0 V1 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT+CMEE=2 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT+CREG=2 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT+CGREG=2 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT+CEREG=2 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT+CGEREP=2,0 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT+CMGF=0 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT+CNMI=1,1,0,1,0 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT+EEMOPT=1 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT*MRD_SN? 
00:15:01 lte,async lte1: rcvd *MRD_SN:723C034BEF58 
00:15:01 lte,debug lte serial: *MRD_SN:723C034BEF58 
00:15:01 lte,async lte1: sent AT+CFUN=4 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT*CGDFLT=0,"IP","internet",,,,,,,,,,1,0,,,,,,,1 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT*CGDFAUTH=0,0 
00:15:01 lte,async lte1: rcvd OK 
00:15:01 lte,async lte1: sent AT+CPIN? 
00:15:01 lte,async lte1: rcvd +CPIN: READY 
00:15:05 lte,async lte1: sent AT+CPMS="SM","SM","SM"

Mon Oct 08, 2018 4:23 pm

Try disabling Advanced tools package, then reboot and check again how far will it go in the dial up sequence.

timnis · Mon Oct 08, 2018 5:01 pm

I disabled Advanced tools and rebooted. I think it will go little bit futher.. But still doesn't work.

There is two which timeout: AT+CFUN? and AT*MRD_SN?

LTE info

[admin@MikroTik] > /interface lte info lte1
     pin-status: no password required
  functionality: tx and rx rf circuit disabled
   manufacturer: "MikroTik"
          model: "R11e-LTE"
       revision: "MikroTik_CP_2.160.000_v008"
           imei: 355654090XXXXXX

Log:

00:08:04 lte,async lte1: sent AT E0 V1 
00:08:04 lte,async lte1: rcvd OK 
00:08:04 lte,async lte1: sent AT+CMEE=2 
00:08:04 lte,async lte1: rcvd OK 
00:08:04 lte,async lte1: sent AT+CREG=2 
00:08:04 lte,async lte1: rcvd OK 
00:08:04 lte,async lte1: sent AT+CGREG=2 
00:08:04 lte,async lte1: rcvd OK 
00:08:04 lte,async lte1: sent AT+CEREG=2 
00:08:04 lte,async lte1: rcvd OK 
00:08:04 lte,async lte1: sent AT+CGEREP=2,0 
00:08:04 lte,async lte1: rcvd OK 
00:08:04 lte,async lte1: sent AT+EEMOPT=1 
00:08:04 lte,async lte1: rcvd OK 
00:08:04 lte,async lte1: sent AT*MRD_SN? 
00:08:04 lte,async lte1: rcvd *MRD_SN:723C034BEF58 
00:08:04 lte,debug lte serial: *MRD_SN:723C034BEF58 
00:08:04 lte,async lte1: sent AT+CFUN=4 
00:08:04 lte,async lte1: rcvd OK 
00:08:04 lte,async lte1: sent AT*CGDFLT=0,"IP","internet",,,,,,,,,,1,0,,,,,,,1 
00:08:04 lte,async lte1: rcvd OK 
00:08:04 lte,async lte1: sent AT*CGDFAUTH=0,0 
00:08:04 lte,async lte1: rcvd OK 
00:08:04 lte,async lte1: sent AT+CPIN? 
00:08:04 lte,async lte1: rcvd +CPIN: READY 
00:08:05 lte,async lte1: sent AT+CFUN? 
00:08:10 lte,error reply timeout for: AT+CFUN? 
00:08:10 lte,async lte1: sent AT E0 V1 
00:08:10 lte,async lte1: rcvd OK 
00:08:10 lte,async lte1: sent AT+CFUN=4 
00:08:10 lte,async lte1: rcvd OK 
00:08:10 lte,async lte1: sent AT+CMEE=2 
00:08:10 lte,async lte1: rcvd OK 
00:08:10 lte,async lte1: sent AT+CREG=2 
00:08:10 lte,async lte1: rcvd OK 
00:08:10 lte,async lte1: sent AT+CGREG=2 
00:08:10 lte,async lte1: rcvd OK 
00:08:10 lte,async lte1: sent AT+CEREG=2 
00:08:10 lte,async lte1: rcvd OK 
00:08:10 lte,async lte1: sent AT+CGEREP=2,0 
00:08:10 lte,async lte1: rcvd OK 
00:08:10 lte,async lte1: sent AT+EEMOPT=1 
00:08:10 lte,async lte1: rcvd OK 
00:08:10 lte,async lte1: sent AT*MRD_SN? 
00:08:25 lte,error reply timeout for: AT*MRD_SN?

timnis · Tue Oct 09, 2018 12:22 pm

send mail to support@mikrotik.com [Ticket#2018100922004913]

BaseBox 5 and R11e-LTE not working

BaseBox 5 and R11e-LTE not working

Re: BaseBox 5 and R11e-LTE not working

Re: BaseBox 5 and R11e-LTE not working

Re: BaseBox 5 and R11e-LTE not working

Who is online