Page 1 of 1

RB4011iGS+RM and Huawei MA5671A SFP ONT

Posted: Wed Oct 24, 2018 5:58 pm
by igorfie
Is there a way to make RB4011iGS+RM recognize and use Huawei MA5671A SFP ONT provided by my ISP? Both RouterOS 6.43.4 and v6.44beta20 can't establish link and eeprom dump looks funny too:
[admin@MikroTik] /interface ethernet> monitor sfp-sfpplus1 once
                name: sfp-sfpplus1
              status: no-link
    auto-negotiation: disabled
  sfp-module-present: yes
         sfp-rx-loss: yes
        sfp-tx-fault: yes
            sfp-type: (unknown)
     eeprom-checksum: good
              eeprom: 0000: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      0010: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      0020: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      0030: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      0040: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      0050: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      0060: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      0070: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      0080: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      0090: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      00a0: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      00b0: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      00c0: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      00d0: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      00e0: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
                      00f0: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ........ ........
The ONT works without issues in a dumb TP-Link MC220L media converter, fwiw. Thank you in advance.

Re: RB4011iGS+RM and Huawei MA5671A SFP ONT

Posted: Wed Oct 31, 2018 7:52 pm
by pas
It's very important to support this SFP because it's one of the more common ONT used in FTTH GPON networks.

Re: RB4011iGS+RM and Huawei MA5671A SFP ONT

Posted: Sat Dec 29, 2018 12:08 am
by phantasms
+1

It's unfortunate to need to use a 40$ media converter when there's a nice unused SFP port on the RB4011. Please include support for the Huawei MA5671A SFP ONT.

Re: RB4011iGS+RM and Huawei MA5671A SFP ONT

Posted: Wed Jan 02, 2019 4:14 pm
by maxb
Do you believe this knowledge would be useful for Mikrotik staff?

http://www.dslreports.com/forum/r322300 ... 57810S-NIC

Re: RB4011iGS+RM and Huawei MA5671A SFP ONT

Posted: Sat Mar 09, 2019 11:04 pm
by scob
+1
Hi!
Support for H650SFP for 4011, CCR and CRS would also be much appreciated!

Re: RB4011iGS+RM and Huawei MA5671A SFP ONT

Posted: Sat Apr 06, 2019 8:53 am
by scloutier
any word from Mikrotik on supporting this ?

actually getting better speed when using the bell hub 3000 in passthrough mode than using the actual media converter...

direct support for the rb4011 would be awesome....

Re: RB4011iGS+RM and Huawei MA5671A SFP ONT

Posted: Fri Apr 12, 2019 6:22 am
by kiwibrew
I'd also very much like Mikrotik support for the Huawei SFP ONT. This would save a lot of rack space & mess.

Re: RB4011iGS+RM and Huawei MA5671A SFP ONT

Posted: Fri May 03, 2019 11:35 pm
by Error0x29A
It's weird.

All my ONT SFP like H650SFP or FGS202 are working fine in another Mikrotik product RB960PGS
https://mikrotik.com/product/RB960PGS