You are welcome

Anav @ Jotne - Thank you so much for spending so much time helping here. I really appreciate it.

I guess I was happy so fast. All works if I connect switches to ether6 ether7 when I connect switches to ether8 ether9 ether10 and ether5 the swiches does not recognize tags,

I know because only these two port ether6 and ether7 working fine with untagged and tagged,

ether8, ether9 ether10 recognize only vlan1 any thoughts?

Post your complete config like this:

/export hide-sensitive

ahhhh its me again ..... sorry, I have figured I have added only ether6 % ether7 to the bridge vlan members ..... fixed now and it works like a charm

thank you thought any way

Hi sprintership,

My current setup is most likely same as yours. Do you mind to share the working configuration.

Thanks

You can also find some simple standard designs here:
https://administrator.de/wissen/mikroti ... 67186.html
Btw. it works with every VLAN Switch on the market

Sorry for the delay, yes above config works for any "brand" of a switch.

I keep forgetting adding another ports to vlan bridge:

/interface bridge port
add bridge=localnetwork interface=ether6-LAN
add bridge=localnetwork interface=ether7-LAN
/interface bridge vlan
add bridge=localnetwork tagged=localnetwork,ether6-LAN,ether7-LAN vlan-ids=\
169,170,171,172,173,180

ok I am a bit of confused, how can I add ether5-LAN to the interface bridge vlan???? when having existing ether10,9,8,7 and 6 every time I try add I have vlan already added

post config,,,,,,,,,,