Hello,
I'm playing arround with an CRS317 and did not get VLAN's working with hardware offloading.
What i was expecting that would work:
/interface bridge
add name=NameBridge
/interface bridge vlan
add bridge=NameBridge tagged=sfp-02,sfp-03,sfp-04 untagged=sfp05 vlan-id=2
So alle the traffic tagged on port 02,03,04 and untagged 05 are in VLAN id 2.
Looking in WinBox in the VLAN the Current Untagged and Current Tagged is not filled in and dont have any traffic on VLAN2 so its not working.
I dont have vlan filtering on the bridge, when i do that its also not working.
What is working is:
/interface bridge
add name=NameBridge
/interface vlan
add vlan-id=2 interface=sfp-02 name=sfp-02-vlan2
add vlan-id=2 interface=sfp-03 name=sfp-03-vlan2
add vlan-id=2 interface=sfp-04 name=sfp-04-vlan2
/interface bridge
port add bridge=NameBridge interface=sfp-02-vlan2
port add bridge=NameBridge interface=sfp-03-vlan2
port add bridge=NameBridge interface=sfp-04-vlan2
port add bridge=NameBridge interface=sfp-05
The mikrotik is in RouterBroad mode because i also got an second network that is using router functions, what i need above is only switching so no NAT of other Router/Queues functions.
What I'm i doing wrong? The second config is working but its look like to much work and traffic is going trough the cpu (i guess)