Community discussions

 
shady79
just joined
Topic Author
Posts: 14
Joined: Wed Jan 03, 2018 11:10 am

Different speeds to the same router.

Wed Nov 28, 2018 11:10 am

Hi

There are 2 mikrotik routers connected between over isp fiber 1Gbit/s link. I launched the eoip tunnel on them. On both side I create bridge interface without any phisical interfaces added to it only for tunnel connection. If I test bandwidth speed from one to another to bridge ip I get result:
Screenshot_3.png
when I do the same but to IP on local interface
Screenshot_2.png
Why those results are so different?
You do not have the required permissions to view the files attached to this post.
MTCNA 1811NA3965
 
2frogs
Long time Member
Long time Member
Posts: 540
Joined: Fri Dec 03, 2010 1:38 am

Re: Different speeds to the same router.

Thu Nov 29, 2018 7:28 am

CPU usage is most likely the cause as it only uses a single core. This bandwidth tool should not be used as an accurate measure.
 
shady79
just joined
Topic Author
Posts: 14
Joined: Wed Jan 03, 2018 11:10 am

Re: Different speeds to the same router.

Thu Nov 29, 2018 8:22 am

at 950Mbit/s
Screenshot_4.png
at 75Mbit/s
Screenshot_5.png
Ii is not a cpu problem. Take me a while, I will draw how it is connected.
You do not have the required permissions to view the files attached to this post.
MTCNA 1811NA3965
 
shady79
just joined
Topic Author
Posts: 14
Joined: Wed Jan 03, 2018 11:10 am

Re: Different speeds to the same router.

Thu Nov 29, 2018 11:24 am

speed from CCR1016 to IP 192.168.123.5 is full to IP 192.168.2.1 is only 76Mbit/s
Also copying files from one PC behind router A to another PC behind router B is very slow.
Here is a draft:
WodaLan.pdf
You do not have the required permissions to view the files attached to this post.
MTCNA 1811NA3965

Who is online

Users browsing this forum: No registered users and 34 guests