Community discussions

MikroTik App
 
vtzam
just joined
Topic Author
Posts: 1
Joined: Wed Oct 24, 2018 11:53 am

ipsec , i cant ping host ftom terminal without pick bridge interface

Sat Jan 12, 2019 12:55 am

Hello all ,

i am new to all this,

I have rb3011, and set up ipsec site to site vpn with another same router in the other end. Everything is good but i have an issue ,

When i am going to ping the other side from terminal does not reply. ex ''ping 10.1.1.1'' the only way to reply is to give ''ping 10.1.1.1 interface=bridge'' . This is a problem because when i add host to netwatch does not work. What is going wrong here ?

*if i ping from terminal clients (windows) everything is going perfect without problems,

Examples ...

10.1.1.1 is the other side ,

[admin@] > ping 10.1.1.1
SEQ HOST SIZE TTL TIME STATUS
0 10.1.1.1 timeout
1 10.1.1.1 timeout
2 10.1.1.1 timeout
3 10.1.1.1 timeout
4 10.1.1.1 timeout
5 10.1.1.1 timeout
6 10.1.1.1 timeout
7 10.1.1.1 timeout
8 10.1.1.1 timeout
9 10.1.1.1 timeout
10 10.1.1.1 timeout
11 10.1.1.1 timeout
12 10.1.1.1 timeout
13 10.1.1.1 timeout
14 10.1.1.1 timeout

[admin@] > ping 10.1.1.1 interface=bridge
SEQ HOST SIZE TTL TIME STATUS
0 10.1.1.1 56 64 36ms
1 10.1.1.1 56 64 35ms
2 10.1.1.1 56 64 34ms
3 10.1.1.1 56 64 35ms
4 10.1.1.1 56 64 36ms
5 10.1.1.1 56 64 35ms
6 10.1.1.1 56 64 35ms
7 10.1.1.1 56 64 35ms
8 10.1.1.1 56 64 34ms
9 10.1.1.1 56 64 35ms
10 10.1.1.1 56 64 34ms
11 10.1.1.1 56 64 35ms
12 10.1.1.1 56 64 35ms

Who is online

Users browsing this forum: RobertsN, UkRainUa and 48 guests