Community discussions

 
ceylan
just joined
Topic Author
Posts: 23
Joined: Sat Feb 10, 2018 3:03 pm
Location: CYPRUS
Contact:

Nv2 presharedkey -- string value

Thu Jan 31, 2019 10:32 pm

i dont know ,why i can not write question martk "?" here. I get this message "Nv2PresharedKey -- string value" i want to use question mark in my nv2-preshared-key.
You do not have the required permissions to view the files attached to this post.
 
Reinis
MikroTik Support
MikroTik Support
Posts: 67
Joined: Wed Jan 02, 2019 12:14 pm
Location: Latvia
Contact:

Re: Nv2 presharedkey -- string value

Fri Feb 01, 2019 10:19 am

The value of string has to be inside quotation marks and add "\" before the special symbol, like
interface wireless set nv2-preshared-key="\?testkey"

If you have problems with other symbols, check https://wiki.mikrotik.com/wiki/Manual:S ... _Sequences
 
ceylan
just joined
Topic Author
Posts: 23
Joined: Sat Feb 10, 2018 3:03 pm
Location: CYPRUS
Contact:

Re: Nv2 presharedkey -- string value

Mon Feb 04, 2019 11:18 am

yess :) thnks, its working.
 
ceylan
just joined
Topic Author
Posts: 23
Joined: Sat Feb 10, 2018 3:03 pm
Location: CYPRUS
Contact:

Re: Nv2 presharedkey -- string value

Wed Apr 10, 2019 11:08 am

Hi reiniss2 please can you help me i have 2 problems.
first one is i am writing any script as follows...
system script add .....
/interface ethernet monitor ether1 once do={
:if ($rate = "10Mbps") do={
/system.........
}}
script is working when i press "run script" button. but i want the script always check the variables and when rate =10Mbps start do command.i know i can use "system scheduler" bu i want to know if i have another possibility?Do we have to use scheduler absolutely???

and second one is i am trying to set sms sending but I get this error "couldn't perform action-no such channel".Actually it was working, i dont know what happend?I share two photos about it.PLEASEE HELP ME :)
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 38 guests