MikroTik

Posted: **Mon Feb 11, 2019 11:47 am**

i have a home router (192.168.0.0/24) and a router in the underground garage (192.168.2.0/24)
Both connected through OVPN site-to-site Layer 3

Is it possible,to "bridge" one device from garage to home ... so that this device is in the same IP Range ?

Richard

Posted: **Mon Feb 11, 2019 1:05 pm**

Yes, with eoip tunnel (which can be secured by ipsec). you'll need to put the eoip interface in local bridge at both ends.

Posted: **Mon Feb 11, 2019 2:23 pm**

From what I understand you use one physical port on both routers and one of them is configured to be on the LAN of the other one (whichever option you want to use).

MikroTik

"bridge" one device from one subnet to other subnet (OVPN)

"bridge" one device from one subnet to other subnet (OVPN)

Re: "bridge" one device from one subnet to other subnet (OVPN)

Re: "bridge" one device from one subnet to other subnet (OVPN)