Hello, I need some help with regards to the DHCP Server + BRIDGE setup, because I don't know why I get wrong IP address on a new bridge I create

I've started from the defconf. My WAN is working and there is a default bridge called `bridge`.

# Steps I took

0. created a new bridge called `LAN_BRIDGE`
1. added 3 interfaces (eth4,5 & wlan1) to a bridge called: `LAN_BRIDGE`
2. Gave `LAN_BRIDGE` an ADDRESS of: 192.168.50.1/24 NETWORK: 192.168.50.0
3. Created DHCP server with interface: `LAN_BRIDGE`
4. Created DHCP server network with ADDRESS: 192.168.50.0/24, GW: 192.168.50.1, NET MASK: 0

# The Issue

When I connect to one of the ports assigned to the `LAN_BRIDGE` I get assigned a wrong IP address IPs I get belong to the `defconf` network 192.168.88.0/24. What did I do wrong in this configuration and why I get wrong leased IP addresses?

You didn't say which IP address pool you gave to the DHCP server.
Therein lies your answer.

You didn't say which IP address pool you gave to the DHCP server.
Therein lies your answer.

Yup you are right I was being a noob and did not set a pool. Thank you for your help.

But there also was one gotcha:

I've noticed a bug in ROS Web it did not display address pool I've created (while selecting it in DHCP Server Settings). But the `Winbox` client had that pool in drop down.