first of all I am not a CS specialist, so sorry for my unclear descriptions.
I have RB951G-2HnD, OS v6.43.8. I am having trouble connecting cloud camera Wyze Cam V2.
I have found that UDP and TCP ports need to be open (as I understand OPEN == FORWARDING).
One source claim that "UDP: open all ports
TCP: Open port 22, 80, 8000, 443, 21047, 10001";
Onother: "You do need to have ports open! Here are the ports required for optimal use: TCP: 80, 123, 443, 8000, 8605, 10001, 10002, and 22345. UDP: 80 and 443"
I tried to open those ports, but did not succeded.
Camera gets it's local ip adress (192.168.88.** checked via winbox) but could not connect to internet (blinking led on camera indicate that there is no connection)
I was wondering maybe I can remove some firewall or NAT filter rule? Or quickly open all ports with simple command?
All kind of advices are welcome.
Code: Select all
[admin@MikroTik] > /ip firewall filter print Flags: X - disabled, I - invalid, D - dynamic 0 D ;;; special dummy rule to show fasttrack counters chain=forward action=passthrough 1 ;;; defconf: accept established,related,untracked chain=input action=accept connection-state=established,related,untracked 2 ;;; defconf: drop invalid chain=input action=drop connection-state=invalid 3 ;;; defconf: accept ICMP chain=input action=accept protocol=icmp 4 ;;; defconf: drop all not coming from LAN chain=input action=drop in-interface-list=!LAN 5 ;;; defconf: accept in ipsec policy chain=forward action=accept ipsec-policy=in,ipsec 6 ;;; defconf: accept out ipsec policy chain=forward action=accept ipsec-policy=out,ipsec 7 ;;; defconf: fasttrack chain=forward action=fasttrack-connection connection-state=established,related 8 ;;; defconf: accept established,related, untracked chain=forward action=accept connection-state=established,related,untracked 9 ;;; defconf: drop invalid [admin@MikroTik] >
Thank you for your time,