Hi everyone!
I have to configure device as a HUB but I don't have any experience working with this devices and OS.
Can you take me step by step throughout the entire configuration or do you have any instructions? Thanks for any help.
A hub is a multiport repeater working on layer 1. It will span a big collision domain. If THIS is needed for what reason ever, you cannot use any switch/bridge (layer 2) device.configure device as a HUB
I'm not sure you know what you require if you think that a hub and a switch are similar.Because I have to simulate something like that in laboratories. Maybe as a bridge to do it, that it would be similar?
Let's start from the beginning. I've never worked on mikrotik before, only Cisco. I have to configure 4 ports on Mikrotik RB 1100, here the visual schematic - https://ibb.co/jJWS2rd 3 of them will be connected to computers, one port will be free. One of the computers will be monitor with Wireshark.I'm not sure you know what you require if you think that a hub and a switch are similar.Because I have to simulate something like that in laboratories. Maybe as a bridge to do it, that it would be similar?
Can you explain what you need to achieve? That could help us understand.
Sent from my cell phone. Sorry for the errors.