Community discussions

MikroTik App
 
miltont
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Wed Nov 11, 2015 3:58 am

TTL Expired

Thu Mar 28, 2019 10:35 am

Greetings

I have an issue reaching a new subnet 10.20.5.0/24 from the other networks
10.20.1.0/24 and 10.20.0.0/24

I dont have issues if i go to the mikrotik 10.20.5.1 and ping 10.20.1.1 succesfully and 10.20.0.1 succesfully.

But if i go to mikrotik 10.20.1.1 and ping 10.20.5.1 i get a reply from 10.20.1.251 with TTL Expired

The 10.20.5.1 mikrotik reaches 10.20.1.1 network via a wireless link, the interface gets ip address 10.20.1.152, but the radio doing the link
its getting assigned 10.20.1.251

What can be done to resolve this issue?
 
mkx
Forum Guru
Forum Guru
Posts: 4347
Joined: Thu Mar 03, 2016 10:23 pm

Re: TTL Expired

Thu Mar 28, 2019 11:25 am

I suspect it's an issue about routing settings on all mikrotiks ... perhaps mixed with some SRC-NAT.

Show us drawing of network topology (which RB connect to which one and what are involved IP subnets) and post results of /ip route print from each involved RB.
BR,
Metod
 
miltont
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Wed Nov 11, 2015 3:58 am

Re: TTL Expired

Thu Mar 28, 2019 11:47 am

Diagram
Network Diagram 2019.jpg
You do not have the required permissions to view the files attached to this post.
 
miltont
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 53
Joined: Wed Nov 11, 2015 3:58 am

Re: TTL Expired

Thu Mar 28, 2019 11:57 am

ip route from 10.20.0.1 MIKROTIK
8 ADC 10.20.0.0/24 10.20.0.1 bridge1 0
18 A S 10.20.1.0/24 10.20.0.126 1
19 A S 10.20.2.0/24 10.20.0.67 1
21 A S 10.20.4.0/24 10.20.0.126 1
22 A S 10.20.5.0/24 10.20.0.126 1

ip route from 10.20.1.1 MIKROTIK
0 ADS 0.0.0.0/0 10.20.0.1 1
27 A S 10.20.2.0/24 10.20.0.1 1
28 A S 10.20.3.0/24 10.20.0.1 1
29 A S 10.20.4.0/24 10.20.1.203 1
30 A S 10.20.5.0/24 10.20.1.152 1

ip route from 10.20.5.1 MIKROTIK
0 ADS 0.0.0.0/0 10.20.1.1 1
1 ADC 10.20.1.0/24 10.20.1.152 combo1 0
2 A S 10.20.2.0/24 combo1 1
3 A S 10.20.4.0/24 10.20.1.203 1
4 ADC 10.20.5.0/24 10.20.5.1 LAN-STE05 0
 
User avatar
sebastia
Forum Guru
Forum Guru
Posts: 1797
Joined: Tue Oct 12, 2010 3:23 am
Location: Antwerp, BE

Re: TTL Expired

Thu Mar 28, 2019 12:31 pm

Check with traceroute, maybe there is a loop in routing.
 
mkx
Forum Guru
Forum Guru
Posts: 4347
Joined: Thu Mar 03, 2016 10:23 pm

Re: TTL Expired

Thu Mar 28, 2019 1:43 pm

I'd check how's Powerbeam CPE configured ... on the diagram netmask on those interfaces is set to /32 while routing setup shows /24. So it might be that in order to have things half-working that devices performs some proxy-ARP. Or that there's some L2 tunnel involved ...
BR,
Metod

Who is online

Users browsing this forum: No registered users and 52 guests