Community discussions

 
AndyTSCS
just joined
Topic Author
Posts: 1
Joined: Wed May 01, 2019 12:57 pm

hex S bridges, firewall and routing

Thu May 02, 2019 1:06 pm

Hi,

I am a new MikroTik / Router OS user and am starting to regret trying a Mikrotik over another router...

I have a HexS router and want to configure it in the following way:

Eth 1 - WAN - Static IP
Eth 2 - Management - VLAN 1 untagged, DHCP Client
Eth 3 - VLAN 301 untagged with DHCP Server, VLAN 303 tagged no DHCP
Eth 4 - VLAN 303 untagged
Eth 5 - Wifi mAP lite, VLAN 500 untagged, DHCP server

I have set up a bridge added port eth3 and have the VLANs working but do not have internet access on VLAN 301

Eth4 is set to PVID of 303 but doesnt seem to have the correct route as i can ping the end device on eth3 but not get full data throughput.

Am i expecting too much of such a small device? would i be better to use a managed switch as well?

Any / all help much appreciated.
 
mkx
Forum Guru
Forum Guru
Posts: 2468
Joined: Thu Mar 03, 2016 10:23 pm

Re: hex S bridges, firewall and routing

Thu May 02, 2019 2:16 pm

Post output of /export hide-sensitive ... replace public IP address with text and hide SSIDs and PSKs.
BR,
Metod
 
anav
Forum Guru
Forum Guru
Posts: 2835
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada

Re: hex S bridges, firewall and routing

Thu May 02, 2019 2:25 pm

/export hide-sensitive file=yourconfigmay02

A diagram would be helpful as well.
I'd rather manage rats than software. Follow my advice at your own risk! (Sob & mkx forced me to write that!)

Who is online

Users browsing this forum: No registered users and 15 guests