I was configuring a routerboard RB2011UiAS MikroTik RouterOS 6.44.3 and I have a question about it. The config is the default one.
#
#Escenario
#
RB2011UiAS Eth9 is conected a smart switch branding Netgear to the switchport 22 in a tagged port Vlan100, pvid 100 and I allow all kind of packets.
From branding switch UI:
VLAN Membership
VLAN ID vlan100
Port 1 22
Interface PVID Configured Current PVID Acceptable Frame Types Ingress Filtering Port Priority
g1 100 100 VLAN Only Enable 0
g22 100 100 VLAN Only Enable 0
Desktop is conected with Net1 to switch port 1 and tags packets with vlan100.
(I temporary conect another link directly from Net2 to eth2 in Ros in order to do the setup)
i follow examples on:
https://wiki.mikrotik.com/wiki/Manual:I ... AN_routing
Code: Select all
[admin@MikroTik] > /interface vlan add name=VLAN100 vlan-id=100 interface=ether10 disabled=no
[admin@MikroTik] > /ip address add address=10.0.100.1/24 interface=VLAN100 network=10.0.100.0
Code: Select all
ping -t 10.0.100.1
Haciendo ping a 10.0.100.1 con 32 bytes de datos:
Respuesta desde 10.0.100.1: bytes=32 tiempo<1m TTL=64
Respuesta desde 10.0.100.1: bytes=32 tiempo<1m TTL=64
Respuesta desde 10.0.100.1: bytes=32 tiempo<1m TTL=64
Respuesta desde 10.0.100.1: bytes=32 tiempo<1m TTL=64
Respuesta desde 10.0.100.1: bytes=32 tiempo<1m TTL=64
Respuesta desde 10.0.100.1: bytes=32 tiempo<1m TTL=64
Respuesta desde 10.0.100.1: bytes=32 tiempo<1m TTL=64
Estadísticas de ping para 10.0.100.1:
Paquetes: enviados = 7, recibidos = 7, perdidos = 0
(0% perdidos),
Tiempos aproximados de ida y vuelta en milisegundos:
Mínimo = 0ms, Máximo = 0ms, Media = 0ms
¿Can anyone give me please any advice to where I can look for ? I'm fairly new to this UI.
Thank you for reading