Community discussions

just joined
Topic Author
Posts: 12
Joined: Sun Oct 14, 2018 12:27 pm

how to access local network

Wed May 15, 2019 8:19 pm


i've created with a hap ac2 router a configuration with a 'home dual ap' quick set.
For internet I've an automatic address acquisition = with gateway =
the local network is dhcp server with ip adress = 192.168.88..1
All work fine, i'e a lot of device connected for example
Now i would like from an address 192.168.1.x from a computer connected to my internet box (address = to acces to the mikrotik local network. I'd like to connect for exemple to
I've tried to create a route between 192.168.1.x and 192.168.88.y but it doesn't work.
How i've to do ?
You do not have the required permissions to view the files attached to this post.
Posts: 28
Joined: Sat Oct 22, 2016 5:23 pm

Re: how to access local network

Thu May 16, 2019 10:16 am

What exact route have you created? I assume you did that on your first router (with the internet which built the 1.XXX network).
You may have to create also a 'back' route on your 88.XXX network (on the ac2) that can route reply packets back to 1.XXX network. But the default route that have to already exist with GW= would have to be sufficient.
Member Candidate
Member Candidate
Posts: 159
Joined: Thu Sep 27, 2018 4:11 pm

Re: how to access local network

Fri May 17, 2019 11:34 am

You want to get into the local network (LAN) coming from WAN (via ethernet 0).
I assume your incoming connection (ICMP? UDP? TCP?) from xxx.1.x is probably blocked by RB Firewall.
Disable firewall to see if that is the issue (but be careful what you do :-))

hapac2, map, hap-lite, ltap-mini, RB4011 :-) !!!

Who is online

Users browsing this forum: No registered users and 5 guests