Hello.

I am proud user of RB962UiGS-5HacT2HnT or hAP ac.
I have 700mbit internet line i my house. Also i have computer with gigabit 5ghz/2,4ghz WLAN (probably, fastest speed it can handle is about 600mbit) and gigabit ethernet on this PC.
Only, thing, that i have changed in my router settings is added pasword and updated it to newer routerOS version.

But, in my PC, when connected to 5ghz, i can only get maximum of ~270mbit.
Please help me, to understand - is that maximum of what can i get from my wifi? Or i need to make some configuration in settings, to get more wifi speed?
Please help me, i am total beginner about this

Hello,
I am not an expert but as far as I know there is not any limitation of bandwidth in the default settings
Did you try connecting the PC with cable? (I hate Wireless)

Regards

Yes, i tried.
Using wire, i can get speeds up to ~650mbit, depenting of moment of day.

Ok, just found something: I found, that my computer gets only 433,3mbits. Tried to search, what this means and found, that i need to change to 80mhz? Am i right?

I start go get your point.
But, where and what i need to change, to get atleast that 866mbits in my pc?
And i sit ~1,5m from router in same room.

Found this topic (have you tried the search option?):
viewtopic.php?t=86734

By selecting Ceee (or any orther 4 digit option) you will get 80MHz channel width.

Make sure you select the channel manually ( I totaly dislike the auto option) and turn down tranmission power (search for antenna gain )

Ok, i selected Ceee.
But, nothing changes.
In my PC, i can see, that it connects to 802.11n. And even, when i switch in router settings, that it need to use only AC, my PC still shows 802.11n. I am getting more and more confused now

You should probably also check what the PC actually supports. Maybe it only supports 20MHz and has one chain/antenna.

Ok, will check.

Also noticed, that in my phone, i can only get about 280mbit speed.

Not a lot of phones and computers have three chains, not a lot will have two.
Most devices have 1 or 2.

https://en.wikipedia.org/wiki/IEEE_802. ... igurations

Cant find, but i think that Huawei P20lite ANE-LX1 version should have 2

Can you please share your current settings?

Hello, friends!

Sorry, for late reply.

I think, that i have found problem, for lack of wifi speed. I think that problem is in my laptop wifi card. Currently i use HP 250 G6 PC with windows 10. And it uses Intel 3168NGW (Or Intel® Dual Band Wireless-AC 3168) wireless card. Over witi, it supports only 433 Mbps. In my laptop, i get around 330 Mbps
In my house, i have gigabit internet connection.
Can some one, please help to find the best alternative, for this wifi card? Because, all cards that i have found similar as this 9260NGW (for example Intel Wireless Network Adapter Card AC 9260 2230 2x2 AC), specification says it supports speeds up to 1733Mbps (understand, that i can't get over gigabit, but little bit less). But, in description i see, that it doesn't support HP computers (from Ebay).

So, can someone help me find the best one wifi card, that is suitable for my computer?
After solving wifi card problem, i will keep to solve my hap ac configuration, because i did full reset (only added password now).

Any one, please?

Do you want to replace wifi card in ntb? This can be a problem because many ntb have some sort of allowed tested parts in bios. . . outside this letter will not be accepted. So you need to find a card that is allowed for that type, which may be the oldest ntb problem - no one is updating the bios. Sorry for my English, perhaps it's understandable.