due to security issues I will enhance my network segmentation, therefore I want to split my home office network into different segments.
my current setup:
ESXi (two network interfaces, one LAN, one WAN)
- virtual DHCP Windows Server
- virtual PFSense Firewall (DHCP Relay for LAN interface)
Netgear Switch (GS108E - Smart Switch with 802.1Q Support)
Mikrotik hAP AC (connected to Netgear Switch)
Mikritik hAP AC lite (located in another room, wireless brige with Mikrotik hap AC)
I already created the VLAN's on the ESXi and at the pfsense firewall. (DHCP relay)
Now I want to configure the hAP AC with following settings:
untagged -> LAN
tagged VLAN-ID 3 -> VLAN for mobile devices
tagged VLAN-ID 4 -> printer
tagged VLAN-ID 5 -> IOT (home automation)
tagged VLAN-ID 6 -> CCTV
(routing should be done by PFSense Firewall)
The wlan1 (2,4GHz) interface should have more virtual AP's. One for each VLAN if necessary to have it wireless... (untagged for devices)
The wlan2 (5GHz) interface should communicate with the second Mikrotik hAP AC lite and the link should be trunked, therefore with the second AP I will enhance the wireless coverage of the VLAN's.
Do you have a idea how to configure this one the Mikrotik device. (first priority is the hAP AC)
Thanks in advance!