Community discussions

 
generalis
just joined
Topic Author
Posts: 1
Joined: Mon Jul 01, 2019 8:56 pm

Mofyfing netmask after OVPN config

Mon Jul 01, 2019 9:02 pm

Hallo everyone. I'm a mikrotik enthusiast but meet small problem in access to LAN by OVPN. Please take a look on routing table:
/ip route> print 
Flags: X - disabled, A - active, D - dynamic, 
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, 
B - blackhole, U - unreachable, P - prohibit 
 #      DST-ADDRESS        PREF-SRC        GATEWAY            DISTANCE
 0 ADS  0.0.0.0/0                          <WAN-GATEWAY>             1
 1 ADC  <WAN-NET>/25 	   <WAN-ADDRESS>   ether1                    0
 2 ADC  192.168.88.0/24    192.168.88.1    bridge                    0
 3 ADC  192.168.88.75/32   192.168.88.71   <ovpn-client1>            0
What should I do if it is possible, to change in line number 3 netmask from 32 to 24. Thanks a lot for an answers.

Who is online

Users browsing this forum: Bing [Bot] and 20 guests