Hi there so I'm a little confused. I've read all the guides and forum. Posts so I may have gone wrong but this is what I need.
20 VLans trunked down port 1 hexs routerboard
Routing between trusted VLans only.
DHCP +gateway with dhcp pool on each VLan
Port 2+3 Managment untagged ports on Vlan 1
Ports 4+5 Wan ports.
So it seems I've correctly setup the wans and NATS as they seem to be behaving. My issue is vlan and bridge
Bridge with vlan filtering. PVID 1
Bridge ports 1/2/3
Bridge vlan trunked 1-20 on ports 1
Bridge vlan untagged 1 on ports 2/3 & bridge
Trusted and un-trusted vlan interface lists
Vlan interfaces created on ethernet 1
Dhcp servers on each vlan interface with pool.
Ip address on each vlan interface
I have a firewall rule blocking vlan routing using interface lists. Untrusted-vlan and trusted-vlan.
So all good in the main network however. Webfig is not accesable on the Managment vlan PVID 1. Also ports 2 and 3 can't talk to devices on Managment vlan except the router. But you can talk to devices on other VLans.........
Where have I gone wrong.