I been trying all day to get my new router to work, model: (CCR1009-7G-1C-1S+) i been trying quickset, i been following guides, looking at the manual, looking at youtube.
I can't even get the router to ping the outside, on it's own. I even looked at my old config, using a CRS as router and that one had no issues, looked at its backup file.
I'm new to Mikrotik routers, so hope someone has the golden key, as i'm blind and cant find the error.
The unit is setup, to get DHCP on its WAN port Ether1. / Ether2 goes to the LAN switch.
I have set up DNS/NAT/Default Route/NAT/DHCP server etc - but it never got to a point where to router can ping the outside world from its terminal. (It is getting a WAN ip from my ISP) and i have not setup any VLAN on the WAN side, i have not done this with my Unifi Router that i changed from.
[martin@MikroTik] > export compact hide-sensitive # jan/02/1970 00:48:03 by RouterOS 6.45.3 # software id = XXXXXXXX # # model = CCR1009-7G-1C-1S+ # serial number = XXXXXXXX /interface list add name=WAN add name=LAN /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip pool add name=dhcp ranges=192.168.1.50-192.168.1.200 /ip dhcp-server add address-pool=dhcp disabled=no interface=ether2 name=dhcp1 /interface list member add interface=ether1 list=WAN add interface=ether2 list=LAN /ip address add address=192.168.1.1/24 interface=ether2 network=192.168.1.0 add address=87.104.X.X/25 interface=ether1 network=87.104.X.X /ip dhcp-server network add address=192.168.1.0/24 gateway=192.168.1.1 netmask=24 /ip dns set servers=220.127.116.11,18.104.22.168 /ip firewall nat add action=masquerade chain=srcnat out-interface=ether1 /ip route add distance=1 gateway=ether1 [martin@MikroTik] >