I have hAP lite where ether3 is connected to computer with samba share when I connect second computer to ether2 and try copy there is almost cable speed close to 100 Mbps.
I configured WIFI to allow maximum MCS7 - which is 65 / 72 MBps - 1 stream only
When I connect 1 client mobil or PC all looks good PC is constantly on 72 Mbps and mobil bouncing between 72 and 65 and real transfer speed was around 40 Mbps for Mobil and 60 Mbps for Notebook
Code: Select all
Mobil - https://drive.google.com/file/d/1uXWJur ... sp=sharing
Notebook - https://drive.google.com/file/d/1TEiQft ... sp=sharing
Then I tried both mobile + notebook at the same time. I was awaiting than total speed will be 65 + 65 or 72 + 72 as hAP lite has 2 streams and real transfer speed will be close to 100 Mbps, but real speed was even worse 40 - 50 Mbps so it looks like 25 per client
Both clients - https://drive.google.com/file/d/1X5cx6I ... sp=sharing
am I doing something wrong or is this normal ? I know that hAP lite is quite cheap but WIFI specification is 2 streams which is 144 Mbps for 20MHz I was awaiting that I can achieve something close to ethernet speed when 2 clients are connected to WiFi and each using just one stream ... I am on very clear 6 channel.
Thanks for any help explanation ..
Code: Select all
/interface bridge add admin-mac=74:4D:28:0F:CF:64 auto-mac=no comment=defconf name=bridge /interface wireless set [ find default-name=wlan1 ] band=2ghz-g/n basic-rates-a/g=12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps basic-rates-b="" disabled=no distance=\ indoors frequency=2437 ht-supported-mcs=mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7 mode=ap-bridge rate-set=configured ssid=\ MikroTik-0FCF68 supported-rates-a/g=12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps supported-rates-b="" wireless-protocol=802.11 wps-mode=\ disabled /interface list add comment=defconf name=WAN add comment=defconf name=LAN /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip pool add name=default-dhcp ranges=192.168.88.10-192.168.88.254 /ip dhcp-server add address-pool=default-dhcp disabled=no interface=bridge name=defconf /interface bridge port add bridge=bridge comment=defconf interface=ether2 add bridge=bridge comment=defconf interface=ether3 add bridge=bridge comment=defconf interface=ether4 add bridge=bridge comment=defconf interface=wlan1 /ip neighbor discovery-settings set discover-interface-list=LAN /interface list member add comment=defconf interface=bridge list=LAN add comment=defconf interface=ether1 list=WAN /ip address add address=192.168.88.1/24 comment=defconf interface=bridge network=192.168.88.0 /ip dhcp-client add comment=defconf dhcp-options=hostname,clientid disabled=no interface=ether1 /ip dhcp-server network add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1 /ip dns set allow-remote-requests=yes /ip dns static add address=192.168.88.1 name=router.lan /ip firewall filter add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp add action=drop chain=input comment="defconf: drop all not coming from LAN" in-interface-list=!LAN add action=accept chain=forward comment="defconf: accept in ipsec policy" ipsec-policy=in,ipsec add action=accept chain=forward comment="defconf: accept out ipsec policy" ipsec-policy=out,ipsec add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related add action=accept chain=forward comment="defconf: accept established,related, untracked" connection-state=established,related,untracked add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new \ in-interface-list=WAN /ip firewall nat add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=out,none out-interface-list=WAN /ip ssh set allow-none-crypto=yes forwarding-enabled=remote /tool mac-server set allowed-interface-list=LAN /tool mac-server mac-winbox set allowed-interface-list=LAN