Community discussions

 
User avatar
SpongeB0B
newbie
Topic Author
Posts: 28
Joined: Wed May 29, 2019 10:18 am

Edit a firewall filter

Sat Aug 10, 2019 5:37 pm

Hi everyone,

I edited one of my firewall filter trough the WebFig and the WebFig add un-needed command (in red) (I just paste the needed filter (number 2)

/ip firewall filter print chain input

2 ;;; defconf: accept ICMP
chain=input action=accept protocol=icmp in-interface=ether2-master log=no log-prefix=""

How can I edit this line ?

Thank you.
Device: Hex: RB750Gr3
 
pe1chl
Forum Guru
Forum Guru
Posts: 5523
Joined: Mon Jun 08, 2015 12:09 pm

Re: Edit a firewall filter

Sat Aug 10, 2019 6:27 pm

Just leave it as it is. It is normal and it does no harm.
 
User avatar
SpongeB0B
newbie
Topic Author
Posts: 28
Joined: Wed May 29, 2019 10:18 am

Re: Edit a firewall filter

Sat Aug 10, 2019 8:01 pm

Thank you for the information,

But is it possible and how ?
Device: Hex: RB750Gr3
 
pe1chl
Forum Guru
Forum Guru
Posts: 5523
Joined: Mon Jun 08, 2015 12:09 pm

Re: Edit a firewall filter

Sat Aug 10, 2019 8:16 pm

Usually only non-default settings are shown but sometimes items may be present even though they are at default value.
This is the case for those logging options it seems.

Who is online

Users browsing this forum: No registered users and 31 guests