I have 2011UiAS-2HnD for a couple of years. After reboot (last week) i have such problems:
I tried to use NetInstall, but program want show my Router/Device while powercycle.I reboot in etherboot mode of course. FW on my workstation is disabled.RouterBOOT booter 6.42.1
RouterBOOT booter 6.42.1
RouterBoard 2011UiAS-2HnD
CPU frequency: 700 MHz
Memory speed: 200 MHz
Memory size: 128 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup
RouterBOOT booter 6.42.1
RouterBoard 2011UiAS-2HnD
CPU frequency: 700 MHz
Memory speed: 200 MHz
Memory size: 128 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup
trying bootp protocol................................. failed
kernel loading failed
..
trying bootp protocol............... failed
kernel loading failed
loading kernel... OK
setting up elf image... OK
jumping to kernel code
opendir: No such file or directory
ERROR: no system package found!
Kernel panic - not syncing: Attempted to kill init!
Rebooting in 1 seconds..
Maybe i should try to update firmware via console? - but actually i don't know how - there re two options:
Maybe some DHCP server with tftp and *npk firmware in tftp root dir?Upgrade firmware options:
e - upgrade firmware over ethernet
s - upgrade firmware over serial port
Can anybody help?