Community discussions

just joined
Topic Author
Posts: 15
Joined: Mon Aug 12, 2019 3:39 am

Mikrotik VLAN isolation with external DHCP server?

Wed Aug 14, 2019 9:15 am

How can I set up VLAN-based separation in MikroTik without DHCP? A Linux server serves as Gateway/DHCP/DNS server. It has two network cards, one for LAN (eth0) and one for WAN (eth1).

On the Linux server, DHCP is already configured for each VLAN (10,20,30).

The Linux server is connected to ether1.
The ether5 and ether6 are connected to WLAN, which is also configured for VLAN 10 and 20.

ether7 and 8 two PCs are directly connected via LAN cable, these should get the IP from the subnet range VLAN30.

I could use this configuration viewtopic.php?t=143620#p706997 for switch (switch.rsc), with the difference that I choose ether1, 5 and 6 as trunk (instead of SFP1/2)? And Ether7 and 8 I must assign the PVID30. Correct?

Who is online

Users browsing this forum: No registered users and 33 guests