Could you please help me with bridging vlan interface with etherne interface?
I have a Router with two phisical interfaces, wlan1 (wireless) and ether1.
wlan1 is connected to the internet, so it's WAN.
On local network I need have ether1 untagged, and vlan3 on ether1 with tag 3. After there is a management swith, which have access ports for untaged and tagged traffic.
MikroTik now is on 6.44.3, but it's not a problem to update or downgrate it.
After router reset I setup wireles and do.
/interface vlan add interface=ether1 name=vlan3 vlan-id=3 /ip address add address=172.16.2.1/24 interface=ether1 network=172.16.2.0 add address=172.16.3.1/24 interface=vlan3 network=172.16.3.0
/interface bridge add name=bridge1 /ip address set [/ip address find address="172.16.2.1/24"] interface=bridge1 set [/ip address find address="172.16.3.1/24"] interface=bridge1 /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=vlan3
If I'm disable one interface, on other everything start work.
/interface bridge port set [/interface bridge port find interface=ether1] disable=yes
I feel what something is missing.
After some playing with disabling interfaces in bridge, it becomes worked again.