Community discussions

 
Uibrthat
just joined
Topic Author
Posts: 1
Joined: Tue Aug 27, 2019 8:23 am
Location: https://litecylinder.com

Mikrotik RouterOS with Failover IP

Tue Aug 27, 2019 12:28 pm

Just a quick guide on howto get connectivity with your failover IP in Mikrotik RouterOS.

Install RouterOS and on first boot press `r` to reject the default configuration.

1) Add your failover IP to the interface
ip address add address=FAILOVER_IP/32 broadcast=FAILOVER_IP
2) Add your failover IP again but this time - you need to add your Hosts gateway IP as the network parameter.
ip address add address=FAILOVER_IP/32 network=HOST_GWIP broadcast=FAILOVER_IP
3) Add the default route
ip route add dst-address=0.0.0.0/0 gateway=HOST_GWIP
4) Confirm connectivity
ping 8.8.8.8

Who is online

Users browsing this forum: No registered users and 21 guests