Code: Select all
# jan/04/1970 02:01:10 by RouterOS 6.45.3
# software id = 2F3F-S04B
#
# model = RBcAPGi-5acD2nD
# serial number = xxxxxxxx
/interface bridge
add admin-mac=74:4D:28:C5:46:A2 auto-mac=no frame-types=\
admit-only-vlan-tagged ingress-filtering=yes name=bridge pvid=88 \
vlan-filtering=yes
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n ssid=MikroTik
set [ find default-name=wlan2 ] band=5ghz-n/ac ssid=MikroTik
add keepalive-frames=disabled mac-address=76:4D:28:C5:46:A5 master-interface=\
wlan1 multicast-buffering=disabled name=work2g ssid=leoj8ohN-F9FD41 \
vlan-id=20 vlan-mode=use-tag wds-cost-range=0 wds-default-cost=0 \
wps-mode=disabled
/interface vlan
add interface=bridge name=vlan88 vlan-id=88
/interface wireless
add keepalive-frames=disabled mac-address=76:4D:28:C5:46:A4 master-interface=\
wlan1 multicast-buffering=disabled name=web2g ssid=ireW1hee-F9FD41 \
vlan-id=70 vlan-mode=use-tag wds-cost-range=0 wds-default-cost=0 \
wps-mode=disabled
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/interface bridge port
add bridge=bridge frame-types=admit-only-vlan-tagged ingress-filtering=yes \
interface=ether1
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
ingress-filtering=yes interface=ether2 pvid=88
/interface bridge vlan
add bridge=bridge tagged=ether1,bridge untagged=ether2 vlan-ids=88
add bridge=bridge tagged=ether1,bridge vlan-ids=20
add bridge=bridge tagged=ether1,bridge vlan-ids=70
/interface wireless cap
set bridge=bridge
/ip address
add address=192.168.88.24 interface=vlan88 network=192.168.88.0
/ip ssh
set forwarding-enabled=remote
/system ntp client
set enabled=yes primary-ntp=192.168.88.1
/tool mac-server
set allowed-interface-list=none
Gateway cannot ping the device via ether1(trunk). And the device cannot ping gateway router via ether1 (trunk). But I found it can ping gateway, if I explicitly choose vlan88 as interface. What am I doing wrong here?
Code: Select all
[admin@MikroTik] > ping 192.168.88.1
SEQ HOST SIZE TTL TIME STATUS
0 no route to host
1 no route to host
2 no route to host
sent=3 received=0 packet-loss=100%
[admin@MikroTik] > ping interface=vlan88 192.168.88.1
SEQ HOST SIZE TTL TIME STATUS
0 192.168.88.1 56 64 0ms
1 192.168.88.1 56 64 0ms
sent=2 received=2 packet-loss=0% min-rtt=0ms avg-rtt=0ms max-rtt=0ms